A new range of SAROS DESIGN tracks

Used in

• Light boxes
• Light boxes for advertising and promotional applications
• Various structures; these tracks ensure easy access to the space behind the ceiling without any assistance.

Advantages

• Easy to install and de-mount
• No special training in the installation of stretch ceilings is required
• Cold installation without any special equipment (no gas guns)
• The possibility of unassisted replacement of ceiling sheets and access to the space behind the ceiling  

Select the best supply option for you!

• Uncut tracks (length in meters) supplied with connection kits (connectors for straight and angular connections)

Select this option if:

You do not know the exact size of your future installation and you have the equipment to cut the tracks yourself;

• Pre-cut installation kits

The tracks are cut to the lengths and angles required. The kits are supplied with appropriate connectors and stretch ceilings at customer’s option.

Select this option if:

The exact size of your future installation is known;

You want to minimize the shipping costs due to smaller-size packs.

All you have to do is to connect the tracks on location and install the film membrane.

• Ready-to-install structures

Select this option if:

Your installation is not very large and the shipping costs are sensible;

You prefer receiving a ready-to-install structure.

Track designs

• Р60A  – suitable for installation of front and rear ceilings (as a rear wall). It is recommended that light sources should be installed on the track along the perimeter of a structure.

• 

• 

Width – 60 mm, anodised.

• Р80A  – suitable for installation of front and rear ceilings (as a rear wall), and, also, for installation of additional protective ceilings. Light sources can be installed both on the track along the perimeter of a structure and on the rear panel for entire area light coverage. 

• 

• 

Width – 80 mm, anodised.

• Р130А (double) – suitable for installation of two front ceilings with two protective ceilings. Light sources can be installed both on the track along the perimeter of a structure and on a panel attached to a fitting in the center of the track.

• 

• 

Width – 130 mm, anodised.

Important!

• Ceilings are manufactured with a shrink rate of 1%.

• Maximum width (boxes with lighting equipment inside) – 1.5 m,   Maximum width (boxes without lighting equipment inside) – up to 3 m. If the width is more than 2 m, an inner spacer is required.

• LED modules with 38 deg. lenses are recommended for side-lit frames.

• We can also supply quasi-mirror ceilings (ceiling sheet width up to 135 cm) to be installed using these tracks.

• Optional extra – tracks painting

For more information and prices, please contact our managers!