Stretch ceiling

Oru 18A, 20205 Narva, Estonia
info@sarosest.com
+372 (35) 6-63-20

Fixing profiles

PROFILES FOR THE STRETCH CEILINGS INSTALLATION 

 

 

PROFILE PICTURE
No 1 visible profile

Used to fasten stretch ceiling plastic material sheets to walls and any vertical surfaces. The distance between raw plugs is 8-10 cm. The visible part is semi-matt, white, and is 26 cm wide. Sheets with visible harpoons fit securely into such tracks, and no covering strip is required. The minimum ceiling height loss is 3 cm.
The track is made of PVC (plastic).
Covering strip is not required.
The track is available in 3 lm sections.

№1
No 2 «Invisible profile»
Used to fasten stretch ceiling plastic material sheets to walls and any vertical surfaces. The ceiling track follows all the unevenness of the walls beneath.
The distance between raw plugs can be up to 10 cm. This track is the only option when curved ceiling sections (even with radius less than 200 mm) without any visible height difference are required.
The minimum ceiling height loss is 2,5 cm.
A gap between wall and profile is covered with an infill strip.
The track is available in 2.5 lm sections.
№2
No 2G «Invisible profile»
Used to fasten stretch ceiling plastic material sheets to walls and any vertical surfaces. The track follows all the unevenness of the walls beneath.
The distance between raw plugs can be up to 10 cm. This track is the only option when curved ceiling sections (even with radius less than 200 mm) without any visible height difference are required.
The minimum ceiling height loss is 2,5 cm.
Covering strip is not required.
Colour: white, black.
The track is available in 2.5 lm sections.
№2G
No 3 «Aluminum ceiling profile» 
Used to fasten stretch ceiling plastic material sheets to ceilings and any horizontal surfaces. The minimum ceiling height loss is 2 cm. The distance between raw plugs can be 20-30cm. A gap between wall and profile is covered with an infill strip.
The track is available in 2.5 lm sections.
№3
No 4 «Aluminum universal profile»
Used to fasten stretch ceiling plastic material sheets to any surfaces (vertical/horizontal). The wall track is very stiff, therefore the distance between raw plugs when fixing it onto a wall or ceiling can be up to 50 cm.
The minimum ceiling height loss is 3 cm.
A gap between wall and profile is covered with an infill strip.
The track is available in 2.5 lm sections.
№4
No 4G «Aluminum universal profile» (anodized)
Used to fasten stretch ceiling plastic material sheets to any surfaces (vertical/horizontal). The wall track is very stiff, therefore the distance between raw plugs when fixing it onto a wall or ceiling can be up to 50 cm.
The minimum ceiling height loss is 3 cm.
Covering strip is not required.
The track is available in 2.5 lm sections.
№4G
No 5 «Aluminum wall profile» 
Used to fasten stretch ceiling plastic material sheets to walls and any vertical surfaces. Rather stiff, does not follow minor wall unevenness.
The distance between raw plugs can be 15-20cm.
The minimum ceiling height loss is 3,5 cm.
Covering strip is not required.
The track is available in 2.5 lm sections.
№5
No 5G «Aluminum wall profile» (anodized)
Used to fasten stretch ceiling plastic material sheets to walls and any vertical surfaces. Rather stiff, does not follow minor wall unevenness.
The distance between raw plugs can be 15-20cm.
The minimum ceiling height loss is 3,5 cm.
A gap between wall and profile is covered with an infill strip.
The track is available in 2.5 lm sections.
№5G
No 6 «Aluminum separator»
Used to join two stretch ceiling sheets together, when fitting stretch ceilings around columns or covering larger spaces.
The minimum ceiling height loss is 2 cm.
A gap between wall and profile is covered with an infill strip.
The track is available in 2.5 lm sections
№6
No 7 «Aluminum separator»
Used to join two stretch ceiling sheets together, when fitting stretch ceilings around columns or covering larger spaces.

The design of this separating track makes it especially suitable when curved stretch ceiling

sheets need to be brought together.
The minimum ceiling height loss is 2 cm.
Covering strip is not required.
The track is available in 2.5 lm sections.
№7
No 18 «Aluminum separator»
Used to join two stretch ceiling sheets together, when fitting stretch ceilings around columns or covering larger spaces.
Separating track No 18 with a special ledge lets you bring two pieces of material right next to each other with no gap showing.
The minimum ceiling height loss is 2 cm.
Covering strip is not required.
The track is available in 2.5 lm sections.
18pr
No 9 «Aluminum double profile»
Used to create three-dimensional lighting constructions based on stretch ceilings and to install stretch ceilings with starry sky effect.
Allows to install two stretch ceiling sheets at the same time.
The track is available in 2.5 lm sections.
№9
No 8A « Corner profile»
Used for corner joining of stretch ceiling sheets, to envelope ceiling beams and when installing multilevel ceilings of various shapes.
The plastic track (No 2) fastened onto the aluminum track rail (No 8А) makes attachment to wall-fixed tracks more precise and simple.
Ensures a smaller bending radius (300 mm – 600 mm) for curved sections.
Features a consistent gap for the covering strip (oval-shaped strip No 15 is recommended).
The track is available in 2.5 lm sections.
№ 16 «Aluminum construction profile»
Used for making the multi-level constructions.
The track is available in 2.5 lm sections.
№16
No 30 «Aluminum turning profile»
The track is designed for PVC sheet folding when installing multilevel ceilings. The main advantages are as follows: the sheet does not cling to track corners; the track is equilateral therefore it can be used any side; the track is anodised, i.e. it does not stain walls and looks high-grade and elegant; owing to its width, this track can easily be combined with tracks No 4, 4g, 5, 5g without any trimming.
The track is available in 2.5 lm sections.
№30
No 22 «LED profile»

An aluminum track used for stretch ceilings with LED strip lighting around the perimeter. The LED strip is fitted vertically over a special ledge; the light is wall-directed.

Track features:

  • Anodised aluminum track;
  • Easily installed (similarly to the aluminum wall track);
  • Recommended LED strip width is 8 mm;
  • No covering strip is required;
  • No significant cuts in the floor-to-ceiling height (the track is 3.5 cm high);
  • The track is 2.1 cm wide.
Light profile
This track was developed for rectangular light box manufacturing. A diffuser is made from translucent PVC film (OT). It is recommended to install protective transparent PVC film to avoid ingress of dust and insects. From above, the light box is covered with a reflector plate (aluminium). Light sources can be fitted both to the reflector plate or over the perimeter of the box. Supplied both as a track and as a customized ready-made light box.
Height 13cm
Length 6 m (can be cut into smaller pieces for transportability)
Aluminium Z-profile (anodized) NEW
Used for installation of “floating” stretch ceilings. Fastened onto aluminium wall track №5 and 5G.
The track is available in 2.5 lm sections.
z-profilsait

For more information please contact our managers